Live on mainnet · tested in this release

Collect creator fees

Claim the creator fees your Pump token has earned to your own wallet, in one approval.

  • VEYDUCT feenone
  • Network fee0.000005 SOL
  • Whothe creator wallet only
Collect my feesPractice a claim
Where creator fees goWorked example from this page
DEMO · bonding curve0.12SOL from 40 SOL of trades
Pump creator vault0.1320.012 held + 0.12 swept
GRAD · PumpSwap pool0.075SOL from 25 SOL of trades
PumpSwap creator vault0.075wrapped SOL, unwrapped on claim
Your wallet+0.20699SOL after two claims and 0.00001 SOL network feesNo VEYDUCT fee

With your wallet

Check and collect

Live on mainnet

Step 1 of 4 Find your token

  1. Find your tokenPaste its address
  2. Check what is waitingThen connect the creator wallet
  3. Review the claimSimulated on mainnet
  4. Approve in your walletOne approval, then a receipt

What happens next Paste your coin’s address and press Check fees: a public read, no wallet needed, nothing moves.

Which token works here?

The coin’s mint address, shown on its Pump.fun page (most end in “pump”). The page reads that coin to find its recorded creator and the fees waiting for it. Use a standard SOL-paired Pump token created by the wallet you will connect. If you already split its fees, pay them out from Share fees instead. Holder-reward, cashback and Mayhem tokens aren’t supported here.

Paste a token address first. Checking moves nothing.
Pump tokenConnect the creator wallet
Ready to claim · your Pump creator vault, shared by all your Pump tokens0 SOL
Goes to
The creator wallet
Your wallet
No wallet connected.
Pump creator vault
—
Pending on this token
—
On PumpSwap · after graduation
—
Only the verified creator wallet can approve a claim.
What one claim covers

The selected token’s pending creator fees are swept into your Pump creator vault. All available SOL in that shared vault is then collected into the connected wallet. One claim covers the vault for all your coins, so it can include fees from your other Pump tokens.

After a coin graduates, creator fees from PumpSwap trades build up as wrapped SOL in your PumpSwap creator vault, which is also shared by all your graduated coins. When it holds value, the same transaction sweeps this coin’s pool creator fees, collects that vault into your WSOL account and closes the account, so everything arrives as SOL in one approval. A temporary WSOL account’s rent is refunded in the same transaction. Fee splits use Share fees instead. No VEYDUCT router, automatic payouts or payments to other wallets are included.

You need a small SOL balance to pay the network fee first. The review uses a mainnet simulation to estimate the net SOL received after costs; it blocks claims with no positive net increase. Public-chain funded acceptance has not been recorded.

Practice run · simulated · nothing is sent

Try it without a wallet

An optional practice run of the claim on a made-up wallet. It loads with the page, needs JavaScript, and never signs or sends anything. The real claim is in the Use it tab.

Where creator fees wait, and what one claim does

Written from the page’s own transaction builder (pump-fees-sdk.js) and Pump’s and PumpSwap’s published program interfaces. Amounts on chain are The smallest unit of SOL. 1 SOL is 1,000,000,000 lamports, so 650,240 lamports is 0.00065024 SOL.: 1 SOL is 1,000,000,000 lamports.

Collects
Your Pump creator vault and, after graduation, your PumpSwap creator vault
Who
Only the wallet Pump recorded as the creator
VEYDUCT fee
None. Only the 0.000005 SOL network fee
Kept back
0.00065024 SOL rent minimum stays in the Pump vault

Accounts involved

Every account is found from fixed seeds (a Program-derived address: an account address computed from a program and fixed words (seeds), with no private key. Anyone can recompute it, so a look-alike address is easy to refuse.), so the page derives each address itself and refuses look-alikes. None of them is a VEYDUCT account.

Pump creator vault

Plain SOL that a sweep moved off your bonding-curve coins. One per creator wallet, shared by every Pump coin you created.

Program
Pump
Seeds
"creator-vault", your wallet
Kept back
0.00065024 SOL rent minimum

Bonding curve

One per coin. It records the coin’s creator and holds that coin’s creator fees (“Pending on this token”) until a sweep.

Program
Pump
Seeds
"bonding-curve", mint
Decides
Who may claim: the recorded creator

PumpSwap creator vault

A SOL held as a token (WSOL) so token programs such as PumpSwap can move it. Closing the token account turns it back into plain SOL. token account for fees from PumpSwap trades. One per creator wallet, shared by all your graduated coins.

Program
PumpSwap
Seeds
"creator_vault", your wallet
Holds
Wrapped SOL (165-byte token account)

PumpSwap pool

A A coin graduates when its Pump bonding curve sells out. Its liquidity moves to a PumpSwap pool and its later creator fees build up there. coin’s canonical SOL pool. It holds that coin’s creator fees until a pool Moving a coin’s waiting creator fees off its curve or pool into your creator vault. A claim sweeps only the coin you checked., and names the coin creator it pays.

Program
PumpSwap
Seeds
"pool", 0, pool authority, mint, wrapped SOL
Swept
Only when it pays your wallet

Your WSOL account

Your wrapped-SOL token account. Created if missing, filled from the PumpSwap vault, then closed, so everything arrives as plain SOL.

Program
SPL Token
Rent
0.00148844 SOL, refunded in the same transaction
When
Only when the PumpSwap side holds value

What one claim does, in order

It is all one transaction, signed once by the creator wallet. If any step fails, nothing moves.

  1. Sweep this coin’s curve feesPump sweep_creator_fee: bonding curve → Pump creator vaultOnly the coin you checked. Your other coins’ curve fees stay on their curves until you check them.
  2. Collect the Pump creator vaultPump collect_creator_fee_v2: vault − rent minimum → your walletThe whole vault, from every coin swept into it so far, except the 0.00065024 SOL rent minimum.
  3. Open your WSOL account if neededAssociated Token Account, create if missing (idempotent)Only when your PumpSwap vault or this coin’s pool holds fees.
  4. Sweep this coin’s pool feesPumpSwap sweep_creator_fee: pool → PumpSwap creator vaultOnly for a graduated coin whose pool pays your wallet.
  5. Collect the PumpSwap creator vaultPumpSwap collect_coin_creator_fee: whole vault → your WSOL account
  6. Unwrap to SOLSPL Token close_account: WSOL account → your wallet as SOLThe wrapped SOL and the account’s rent come back as plain SOL.

Before your wallet opens, the page simulates this exact transaction on mainnet and shows the SOL your wallet would gain. When you approve, it checks again that your wallet is still the creator and the transaction is unchanged.

Who can do what

  • ActionWhoRules
  • Check a coinAnyoneReads public data only. No wallet needed, nothing moves.
  • ClaimThe creator wallet onlyThe wallet Pump recorded on the coin’s bonding curve signs. The SOL can only go to that same wallet.
  • Sweep a poolThe creator wallet, in the claimOnly a canonical PumpSwap pool whose coin creator is your wallet.
  • Fees after sharing startsThe coin’s recipientsNew fees go to the Pump sharing account. Pay them out from Share fees.
  • Take your feesNobody elseVEYDUCT never holds them and has no instruction that can move them.

The math, with a worked example

  1. Ready to claim (the headline)(Pump vault − 650,240) + this coin’s curve fees + PumpSwap vault + this coin’s pool fees650,240 lamports is Solana’s Every Solana account must keep a small SOL deposit to exist. For the Pump creator vault it is 0.00065024 SOL, so that part is never claimable. for the vault: (0 bytes + 128) × 5,080 lamports per byte.
  2. You receiveheadline − network fee (5,000 lamports)The temporary WSOL rent is refunded in the same transaction. If nothing positive is left, there is nothing to approve.

Example

  1. Your Pump creator vault already holds 0.012 SOLabove its rent minimum, from earlier sweeps.
  2. Traders move 40 SOL on DEMO (on its curve) and 25 SOL on GRAD (graduated).at an example 0.30% creator fee: 0.12 SOL on DEMO’s curve, 0.075 SOL on GRAD’s poolOn the curve Pump pays creators 0.30% today; after graduation PumpSwap pays 0.05% to 0.95%, by market cap.
  3. You check DEMO and claim.0.120 SOL + 0.012 SOL = 0.132 SOL; minus 0.000005 SOL network fee = 0.131995 SOLYou receive 0.131995 SOL. GRAD’s 0.075 SOL stays on its pool.
  4. You check GRAD and claim.0.075 swept from the pool, unwrapped; minus 0.000005You receive 0.074995 SOL. In total, 0.20699 SOL for 0.00001 SOL of network fees.

Run the same steps in the Practice tab: it uses the live page’s headline formula, so you will see these numbers.

Costs

VEYDUCT feeCollecting your own creator fees is free on VEYDUCT.
None
Network feeOne signature per claim.
0.000005 SOL
Temporary WSOL accountNeeded up front when the PumpSwap side holds fees; refunded in the same transaction.
0.00148844 SOL, refunded
Rent minimum kept in the Pump vaultStays in your vault; it is never claimable.
0.00065024 SOL
Older coinsPump may extend an older, shorter bonding-curve account during the sweep; your wallet pays that extra rent, and the review’s mainnet simulation includes it.
Shown in the review

Edge cases and what can go wrong

Nothing left after costs

If the vaults are empty or hold less than the network fee, the review stops: “No positive net SOL claim is available after costs.”

Not the creator wallet

Anyone can check a coin, but only the recorded creator can claim. Switch to the wallet that created the coin.

No SOL in the wallet

The network fee is paid before the fees arrive. Add about 0.001 SOL, or about 0.0015 SOL more when the PumpSwap side needs the temporary WSOL account.

Pool pays someone else

If a graduated coin’s pool names a different coin creator, its pool fees are left out. Your own PumpSwap vault is still collected.

Fee sharing is on

Once a coin uses Pump fee sharing, its new fees go to the sharing account, not your vault. Use Share fees to pay them out.

Unsupported coins

Mayhem, cashback and holder-reward coins, coins launched before Pump creator fees, and coins not paired with SOL use other fee flows.

Wrapped SOL you already held

Closing your WSOL account unwraps it too. The estimate does not count it as claimed fees.

Uncertain submission

If the network’s answer is lost, the saved receipt locks new claims until you check confirmation. Reloading never repeats a claim.

FAQ

Why is “Ready to claim” lower than my vault balance?

The Pump creator vault must keep Solana’s rent minimum, 0.00065024 SOL, so that part is never claimable. The headline leaves it out.

Does a claim for one coin include my other coins?

It collects your whole Pump creator vault and PumpSwap creator vault, which every one of your coins pays into once swept. Fees still waiting on another coin’s curve or pool are swept only when you check that coin.

Does VEYDUCT take a cut?

No. There is no VEYDUCT fee on claims and no VEYDUCT account in the transaction. You pay only the Solana network fee.

Can anyone else claim my fees?

No. Pump and PumpSwap pay creator vaults only to the creator wallet, which must sign the claim.

How often can I claim?

Whenever you like. There is no lockup or schedule; each claim costs one network fee, so claiming tiny amounts often is not worth it.

What changes when my coin graduates?

Its new fees build up on its PumpSwap pool and then in your PumpSwap creator vault as wrapped SOL. The same claim sweeps, collects and unwraps them to SOL.

I started fee sharing. Why is there nothing here?

After sharing starts, the coin’s new creator fees go to its Pump sharing account and are paid out to the recipients from Share fees. Fees earned before you opted in were swept to your own vault and can still be collected here.

Tested in this release

Test results are published with each release

Every release build runs this page’s own claim transactions against captured copies of Pump’s and PumpSwap’s mainnet programs in an isolated Solana runtime (LiteSVM). This copy of the site has no build results attached; Release status lists the latest release.

  • A real Pump coin is created, bought until it graduates, migrated to PumpSwap and traded, so real creator fees build up in both vaults.
  • The page’s claim sweeps and collects the curve fees, then collects the curve and PumpSwap vaults in one transaction and unwraps to SOL, with exact lamport accounting, including wrapped SOL you already held.
  • Claims from the wrong wallet, look-alike vaults and altered transactions are refused by the page and the relay.